Motor Hoist Cases
ABS Cases are designed to cope with the weight of the most difficult loads. Our Motor boxes are tough, rugged and versatile. Inside an ABS Motor hoist case is an extremely rugged 18mm ply shell that is sub-divided into separate areas for the hoist, chain & bag and mains/signal cables, all with radiused cut-outs to allow access of the chain and cable from the hoist into their individual areas. All joints on the 18mm internal shell are rebated, glued and screwed to withstand the heaviest of use. Some designs incorporate a removable/adjustable divider that allows different length hoists to be used within a generic design of case. A range of designs covering all types of Loadstar, Liftket and Loadguards, to mention a few, are available. Smaller hoist such as 500kg Loadstars are often housed two in a case and 250kg Prostars are available in 2,3 or 4 way versions. If you have a specific requirement to be taken into account please speak with our design team, who will assist you with your request. Extra heavy duty castors can be added if the cases are to withstand very heavy loads.
Example Specification: 2 way Half Ton Lodestar Case
- Material: 9mm Birch Plywood bonded with High Pressure Laminate
- 18mm birch ply internal interiors, rebated, glued and screwed.
- Flip Handles.
- Heavy Duty 100mm Castors
All our cases are designed and manufactured in-house and are available with an unlimited range of accessories. Whatever your requirement we can build you the perfect motor hoist flight case.
Our design team is always on hand to discuss your unique needs, please call us with your specification and we will get back to you within 48 hours with your custom flight case quote.
OTHER PRODUCTS YOU MAY BE INTERESTED IN
ABS Cases produce a variety of rack cases suitable for housing your 19” Rack Equipment. From a standard 19” Rack Case with lift off lids front & rear to Rack Sleeves suspended in an Outer Rack Case for extra protection.
ABS Cases stock a selection of 19” rack hardware including 19” Rackmount drawers, keyboard/mouse pull out tables, 19” Rackmount panels, M6 screws/plastic cup washer/cage nut kits and shelf supports.
Our Casemaker Range of cases is a system of aluminium extrusions developed in house and manufactured from our own dies.
The system comprises of one lid section that fits a range of four different depths of base section.
Recent developments in Moving Head Fixture technology have seen a marked increase in the demand for flightcases. SIP inserts provided with products from major manufacturers can be dropped into our designs for maximum protection.